SOUND ENGINEERING / MIXING / MASTERING

PRODUCTION
NOTES.

Working methods for hard techno, hardcore and hard-bounce records — written from the point of view of music that has to work on a physical system.

PHANTOM / DSP / PRACTICAL WORKFLOWS

How JDMeet Phantom Works

Follow the four-band signal path, understand Drive, Punch, Diffuse and stereo, and check the result on bass, drums and a mix bus. Real interfaces and source-derived diagrams.

READ THE TECHNICAL GUIDE →
APP STORE / IPHONE & IPAD / PRODUCT NEWS

jdmeet camelot Is Now on the App Store

Our free harmonic-mixing wheel is now an offline iPhone and iPad app. Find compatible keys, then choose the next track by ear.

READ THE RELEASE STORY →
DJ TOOLS / HARMONIC MIXING / 8 MIN READ

How to Use the Camelot Wheel

Four basic moves, a full key chart and a 9A transition, plus a Key Lock test for tempo and pitch changes.

READ THE NOTE →
FREE MAC PLUGINS / HARD DANCE / PRACTICAL GUIDE

JDMeet Phantom vs Crusher: Which One Fits Your Sound?

A problem-first choice matrix, controlled listening protocol, real Phantom interfaces and calculated mono/Side examples for kicks, bass and leads.

READ THE GUIDE →
HARDCORE / KICK DESIGN / SAMPLE WORKFLOW

How to Mix a Distorted Hardcore Kick Tail

Prove note-off response, calculate pitch-versus-duration changes, and isolate tail problems before adding distortion or EQ.

READ THE NOTE →
DISTORTION / HARMONICS / CONTROLLED COMPARISONS

Saturation vs Distortion vs Clipping

Compare EQ order, bus intermodulation and peak control with calculated examples and level-matched kick/bass listening checks.

READ THE NOTE →
EQ / DYNAMICS / CONTROLLED COMPARISONS

Static EQ vs Dynamic EQ

Separate the audible band from its detector, compare baseline and dynamic gain, and troubleshoot kick/bass ducking.

READ THE NOTE →
Calculated spectra of the same two synthetic tones at different FFT sizes
ANALYSIS / FREQUENCY / LISTENING EXPERIMENTS

How to Read a Spectrum Analyzer

Separate FFT display choices, spectral overlap and cancellation with repeatable listening and summing tests.

READ THE NOTE →
GAIN / HEADROOM / 10 MIN READ

Gain Staging in a Modern DAW

Control the level entering every processor without turning gain staging into a fixed-number ritual.

READ THE NOTE →
PHASE / LOW END / 11 MIN READ

Phase and Polarity: Why Your Low End Disappears

Align layered kicks, rumbles and subs without confusing timing, phase and polarity.

READ THE NOTE →
Original routing diagram separating audible kick, bass gain stage and detector feed
SIDECHAIN / HARD TECHNO / DAW WORKFLOW

Sidechain Compression: Ableton Live & FL Studio

Prove the routing, separate trigger duration from release, and diagnose late bass recovery with original diagrams and calculated examples.

READ THE NOTE →
Calculated compressor gain response for three attack constants
COMPRESSION / TRANSIENTS / 13 MIN READ

Threshold, Ratio, Attack and Release

Control peaks and density without flattening the impact of fast hard-techno drums.

READ THE NOTE →
Calculated bell and high-pass filter responses
EQ / FUNDAMENTALS / PRACTICAL GUIDE

Frequency, Gain and Q Without Guesswork

Compare low and high Q at the same frequency and gain, then test bandwidth and masking in a hard-techno mix.

READ THE NOTE →
VST3 DEVELOPMENT / RELEASE VERIFICATION

Building JDMeet Crusher for Modern macOS

Verified Crusher 0.1.5 package checks, universal Mac builds, signing versus notarization, and the limits of DAW validation.

READ THE BUILD STORY →
Original kick-decay and bass-onset envelope example, not a recorded mix
MIXING / LOW END / DIAGNOSTIC WORKFLOW

How to Mix Kick and Bass in Hard Techno

Separate masking, cancellation and ducking with original diagrams, evidence checks and a controlled phrase experiment.

READ THE NOTE →

JDMEET STUDIO

NEED ANOTHER
SET OF EARS?

Use these notes to diagnose the track first. If the low end, dynamics or translation still resist, send a private bounce for focused mix feedback, mixing or mastering.

EXPLORE MIXING, MASTERING & MIX FEEDBACK →